Wednesday, December 29, 2010

Tips fo Prisma color Pencils

If you have a set of Prisma colored pencils you probably know how fantastic they are for coloring and what a wide variety of colors they come in. And you might even know that you can use a product called Gamsol ( mineral spirits ) to dissolve them and create some interesting effects but did you know that there is a much safer and much more economical alternative to Gamsol?

Today I am going to show you how to use your colored pencils with a product you probably already have in your home. And it probably only cost you a dollar or two for 16oz. What is this mystery product? Drum roll please .... Plan old Rubbing Alcohol. Yep, Alcohol. It dissolves the wax in your pencils without damaging them or leaving any residue. It also drys quickly and allows you to work back over your drawing or stamped image quickly.

You might be thinking " Okay, Eric, that's great and all but what can I do with it and how am I supposed to do it?"

My answer, "Good Question." Your reply "Thanks".

Let me show you.

Because you can use alcohol to dissolve the vehicle ( the wax ) that carries the pigment ( the colored bits ) in your pencils this opens up a wide variety of tools you can now use with your colored pencils and a huge range of possibilities. For his demonstration I will stick to a few basic tools. Ones that you will see me use often in future demonstrations.

Here are a few of the tools that you might already have floating around and the ones I will be using.

They are a round #5 paint brush for acrylics, Two different brands of colorless alcohol marker blenders (one of their names starts with a "C" and ends in "opic", a Adirondack's alcohol ink fillable pen ( very handy ), a Refill bottle for a colorless blender from a maker company that starts with that letter C, and last but not least a well used toothbrush.

First chose the image you want to work with and stamp, draw or print off two. Pick the one you want to make a mask from and cut it out. Remember the better the job you do cutting out your mask the better your results will be.

Using either your refill bottle of colorless blender ink, ie alcohol. Or a small container filled with Rubbing Alcohol. Dip the end of your old toothbrush into the alcohol. Here is the important part. You don't need a lot. Just enough to wet the bristles should be enough.

Now on a scrap piece of paper start rubbing the sharpened end of you pencil across the end of the toothbrush. Going away from you is best if you don't want to wear whatever color your using. Try changing the angle and distance away from the paper that you hold the toothbrush to see different effects. Once you're comfortable with how it works place the mask over your image and applying the color to it using toothbrush. The results should look something like this.



Next you can use your paintbrush dipped in alcohol to paint with. There are two ways to do this. One is to color in an area with your pencils and then wash over it with the wet brush. The other is to rub the wet brush over the sharpened end of your pencil loading the brush with color. Both techniques work great and I used both in the next pictures. If you look closely you can see the brush strokes created by the washes and daubs of color created by loading the brush with color from the pencil.


Remember at any point once the alcohol has dried you can go back and color over it with your pencils. This is what I did with the tan color in the picture above.

In the next series of pictures I will use my pencils to color in different areas on the car, boy and dog using one or the other of the blending markers to blend the colors together and to fade them out to white. I will also work back over these areas with the pencils building up different layers of color to create more depth.

In this picture I started with a ochre base color for the whole box.Then I applied red to the edges and corners. Using a blending marker I mixed the two colors together.


Here I added some more red with the pencils and blended it together using the brush tip of the Copic blender ( ha! I bet you thought I wasn't going to say it did you! ha! ) The Copic's brush tip gives you a looser blend. 




Here using grey and one of the blenders with a firmer tip I have colored in the wheels and goggles while adding some shadow to the boxes. The blenders with the firmer tips seem to work best for fading colors to white.


And finally using the various techniques above is the finished image.

I hope you enjoyed this demo and found it useful. If you have any questions drop me a email.
Thanks
-Eric

17 comments:

  1. nice demo! I've been using prismacolor pencils for years, I love learning new tricks. A couple other solevents that work are Bestine ( fast but horribly bad for you) and odorless mineral spirits. I like using them on vellum that way you can do all of your ground and "underpainting" on the back side with other media that usually doesn't play nice with colored pencil, I like oil pastel (that can also be broken up with solovent). Then spray fix that side, flip the paper over and finish the piece with pencil, you get a lot of depth and luminosity this way. Learned this from a demo by Sergio Martinez.
    Thanks for the post now off to get some friskette and rubbing alcohol.

    ReplyDelete
  2. Thank you for your amazing art and sharing your knowledge. I love all the tips and techniques I'm getting from the artists that are sharing their love because of OWH. Many blessings to you for the New Year. <3

    ReplyDelete
  3. Eric, I've had pencils for about 3 years and this is the first demo I've seen do all these wonderful things!! Thank you so much for these tips! Love all of them!!

    ReplyDelete
  4. Super tutorial! I love using these since I don't have the budget for lots of Copics. Now off to try some of these great tips thanks so much

    ReplyDelete
  5. Thanks so much for sharing your tricks of the trade! I like to use color pencils as well, and have been using the prismacolor blender successfully...but will try the rubbing alcohol
    and paintbrush technique.

    ReplyDelete
  6. Great work on this tutorial Eric. I haven't been using my pencils much in the past year and this technique will make them feel new all over again.

    ReplyDelete
  7. Thanks for this great tutorial, Eric! I love Prismacolor pencils and look forward to trying these techniques!

    ReplyDelete
  8. I have the rubbing alcohol, the toothbrush LOL and the Prismacolors. I'll have to hop over to Amazon and load up on the rest.

    ReplyDelete
  9. I can't wait to try this! I usually use Goo Gone or baby oil as a blender with my pencils, but I like the effects you got with the alcohol. There's always a science behind all of our art supplies, and I'm glad you took the time to explain the process involved like you did. Thanks!!!

    ReplyDelete
  10. wicked cool!!! Can you use this when you base color with one of those 'c' markers? Like if you lay the base coat with the marker and then shade with the pencils? That's what I have used gamsol for...

    ReplyDelete
  11. Yes, Kelli you can. In fact I teach a class that covers using Copic/ alcohol markers with colored pencils. Have fun!

    ReplyDelete
  12. This is cool,,,,,,,I don't like the toxicity of gamsol, so I've been using baby oil,,,,it WORKS,,,,,but not as fast as the alcohol. Be careful of breathing the fumes though,,,,,,rubbing alcohol isn't the best thing to breathe in. I saturate a cotton ball and put it in a small tupperware container,,,,,that way there's not too much rubbing alcohol throwing up fumes. Thanks for the tip,,,,

    ReplyDelete
  13. Hi Eric,

    Great tutorial. I found it on Pinterest.
    Thanks for sharing:-)

    Can you tell me on what kind of paper you are coloring?
    I have tried so much, but can't find the right paper.

    Thanks;)

    Greetz,
    Neltine

    ReplyDelete
  14. Thank you so much !!! I have learned a lot !!!

    Pierre

    ReplyDelete